| |
Cyberspace 2.4.16 SuSE bootlog
25 May 2002
Hardware components/drivers marked in bold.
Inspecting /boot/System.map-2.4.16-4GB
Loaded 11635 symbols from /boot/System.map-2.4.16-4GB.
Symbols match kernel version 2.4.16.
No module symbols loaded.
klogd 1.4.1, log source = ksyslog started.
Linux version 2.4.16-4GB (root@I386.suse.de) (gcc version 2.95.3 20010315
(SuSE)) #1
Mon Apr 15 09:35:46 GMT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ffe000 (usable)
BIOS-e820: 0000000007ffe000 - 0000000008000000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
On node 0 totalpages: 32766
zone(0): 4096 pages.
zone(1): 28670 pages.
zone(2): 0 pages.
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=linux ro root=303 BOOT_FILE=/boot/vmlinuz
enableapic vga=0x0317
Initializing CPU#0
Detected 1197.009 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2385.51 BogoMIPS
Memory: 126068k/131064k available (1304k kernel code, 4612k reserved,
388k data, 112k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel(R) Celeron(TM) CPU 1200MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfcaee, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
vesafb: framebuffer at 0xf1000000, mapped to 0xc880d000, size 16320k
vesafb: mode is 1024x768x16, linelength=2048, pages=8
vesafb: protected mode interface info at c000:02d2
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALLP LM10.2, ATA DISK drive
hdc: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive
hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c02fa8a0, I/O limit 4095Mb (mask 0xffffffff)
hda: 19925880 sectors (10202 MB) w/1900KiB Cache, CHS=1240/255/63, UDMA(33)
hdc: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
hdd: No disk in drive
hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
loop: loaded (max 8 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya"
Kasprzak.
ide-floppy driver 0.97.sv
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing................................................done.
Freeing initrd memory: 439k freed
VFS: Mounted root (ext2 filesystem).
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 112k freed
Adding Swap: 514072k swap-space (priority 42)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri May 24 23:23:29
2002
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.24a (02-Sep-2001)
/dev/hda3: clean, 123800/1179648 files, 1100150/2357538 blocks
/dev/hda1: clean, 33/4016 files, 5138/16033 blocks
doneSetting up /lib/modules/2.4.16-4GBdone
Mounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /boot type ext2 (rw)
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockdone
Setting up timezone datadone
Setting up loopback devicedone
Setting up hostnamedone
Mount SHM FS on /dev/shmdone
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRunning /etc/init.d/boot.local
doneCreating /var/log/boot.msg
donekillproc: kill(24,29)
Enabling syn flood protectiondone
Disabling IP forwardingdone
killproc: kill(24,3)
Boot logging started on /dev/tty1(/dev/console) at Sat May 25 06:23:46
2002
Master Resource Control: previous runlevel: N, switching to runlevel:
3
/etc/init.d/rc3.d/S01dummy start
'/etc/init.d/rc3.d/S01dummy start' exits with status 0
/etc/init.d/rc3.d/S01personal-firewall.initial start
Starting personal-firewall (initial) [not active]unused
'/etc/init.d/rc3.d/S01personal-firewall.initial start' exits
with status 6
/etc/init.d/rc3.d/S01random start
Initializing random number generatordone
'/etc/init.d/rc3.d/S01random start' exits with status 0
/etc/init.d/rc3.d/S02dhclient start
'/etc/init.d/rc3.d/S02dhclient start' exits with status
0
/etc/init.d/rc3.d/S05network start
Setting up network device eth0
done'/etc/init.d/rc3.d/S05network start' exits with status
0
/etc/init.d/rc3.d/S06hotplug start
Starting hotplugging services [ usb ]done
'/etc/init.d/rc3.d/S06hotplug start' exits with status 0
/etc/init.d/rc3.d/S06ipvsadm start
ipvsadm: clearing the current IPVS table, applying IPVS configuration:
done
'/etc/init.d/rc3.d/S06ipvsadm start' exits with status 0
/etc/init.d/rc3.d/S07route start
Setting up routing (using /etc/route.conf)done
'/etc/init.d/rc3.d/S07route start' exits with status 0
/etc/init.d/rc3.d/S09sshd start
Starting SSH daemonstartproc: execve (/usr/sbin/sshd) [
/usr/sbin/sshd ],
[ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console
vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48
SHLVL=2
COLUMNS=128 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/
TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
'/etc/init.d/rc3.d/S09sshd start' exits with status 0
/etc/init.d/rc3.d/S09syslog start
Starting syslog servicesstartproc: execve (/sbin/syslogd)
[ /sbin/syslogd
], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console
vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48
SHLVL=2
COLUMNS=128 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/
TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/syslogd ]
done
startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48 SHLVL=2 COLUMNS=128
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/sbin/klogd ]
'/etc/init.d/rc3.d/S09syslog start' exits with status 0
/etc/init.d/rc3.d/S09xfs start
Starting X Font Serverstartproc: execve (/usr/X11R6/bin/xfs)
[
/usr/X11R6/bin/xfs -nodaemon -user nobody -port 7100 ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48 SHLVL=2 COLUMNS=128
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/X11R6/bin/xfs ]
done
'/etc/init.d/rc3.d/S09xfs start' exits with status 0
/etc/init.d/rc3.d/S10acct start
'/etc/init.d/rc3.d/S10acct start' exits with status 0
/etc/init.d/rc3.d/S10portmap start
Starting RPC portmap daemondone
startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48 SHLVL=2 COLUMNS=128
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/sbin/portmap ]
'/etc/init.d/rc3.d/S10portmap start' exits with status 0
/etc/init.d/rc3.d/S11nfs start
'/etc/init.d/rc3.d/S11nfs start' exits with status 0
/etc/init.d/rc3.d/S12apmd start
'/etc/init.d/rc3.d/S12apmd start' exits with status 0
/etc/init.d/rc3.d/S12at start
Starting service at daemon:startproc: execve (/usr/sbin/atd)
[
/usr/sbin/atd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux
LINES=48 SHLVL=2 COLUMNS=128 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386
OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
'/etc/init.d/rc3.d/S12at start' exits with status 0
/etc/init.d/rc3.d/S12fbset start
'/etc/init.d/rc3.d/S12fbset start' exits with status 0
/etc/init.d/rc3.d/S12kbd start
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Loading console font lat1-16.psfu
doneSetting up console ttys
done'/etc/init.d/rc3.d/S12kbd start' exits with status 0
/etc/init.d/rc3.d/S12lpd start
'/etc/init.d/rc3.d/S12lpd start' exits with status 0
/etc/init.d/rc3.d/S12raw start
'/etc/init.d/rc3.d/S12raw start' exits with status 0
/etc/init.d/rc3.d/S12rwhod start
'/etc/init.d/rc3.d/S12rwhod start' exits with status 0
/etc/init.d/rc3.d/S12sane start
'/etc/init.d/rc3.d/S12sane start' exits with status 0
/etc/init.d/rc3.d/S12sendmail start
'/etc/init.d/rc3.d/S12sendmail start' exits with status
0
/etc/init.d/rc3.d/S12smb start
Starting SAMBA nmbd :startproc: execve (/usr/sbin/nmbd)
[ /usr/sbin/nmbd
-D ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console
vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48
SHLVL=2
COLUMNS=128 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/
TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
done
Starting SAMBA smbd :startproc: execve (/usr/sbin/smbd)
[ /usr/sbin/smbd
-D ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console
vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48
SHLVL=2
COLUMNS=128 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/
TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
done
'/etc/init.d/rc3.d/S12smb start' exits with status 0
/etc/init.d/rc3.d/S12ugidd start
'/etc/init.d/rc3.d/S12ugidd start' exits with status 0
/etc/init.d/rc3.d/S12xntpd start
'/etc/init.d/rc3.d/S12xntpd start' exits with status 0
/etc/init.d/rc3.d/S12ypbind start
'/etc/init.d/rc3.d/S12ypbind start' exits with status 0
/etc/init.d/rc3.d/S13autofs start
'/etc/init.d/rc3.d/S13autofs start' exits with status 0
/etc/init.d/rc3.d/S13cron start
Starting CRON daemonstartproc: execve (/usr/sbin/cron) [
/usr/sbin/cron ],
[ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console
vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48
SHLVL=2
COLUMNS=128 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/
TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
'/etc/init.d/rc3.d/S13cron start' exits with status 0
/etc/init.d/rc3.d/S13fam start
'/etc/init.d/rc3.d/S13fam start' exits with status 0
/etc/init.d/rc3.d/S13ksysguardd start
'/etc/init.d/rc3.d/S13ksysguardd start' exits with status
0
/etc/init.d/rc3.d/S13lisa start
Starting lan browser daemon for KDEstartproc: execve (/usr/sbin/lisa)
[
/usr/sbin/lisa -c /etc/lisarc ], [ PWD=/ BOOT_FILE=/boot/vmlinuz
HOSTNAME=cyberspace CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES
MACHTYPE=i386-suse-linux LINES=48 SHLVL=2 COLUMNS=128 BOOT_IMAGE=linux
SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/lisa ]
done
'/etc/init.d/rc3.d/S13lisa start' exits with status 0
/etc/init.d/rc3.d/S13nfsserver start
Starting NFS serverstartproc: execve (/usr/sbin/rpc.mountd)
[
/usr/sbin/rpc.mountd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux
LINES=48 SHLVL=2 COLUMNS=128 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386
OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd
]
startproc: execve (/usr/sbin/rpc.nfsd) [ /usr/sbin/rpc.nfsd
], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48 SHLVL=2 COLUMNS=128
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/rpc.nfsd ]
done
'/etc/init.d/rc3.d/S13nfsserver start' exits with status
0
/etc/init.d/rc3.d/S13nscd start
'/etc/init.d/rc3.d/S13nscd start' exits with status 0
/etc/init.d/rc3.d/S13smbfs start
'/etc/init.d/rc3.d/S13smbfs start' exits with status 0
/etc/init.d/rc3.d/S14xinetd start
Starting console mouse support (gpm): '/etc/init.d/rc3.d/S14xinetd
start'
exits with status 0
/etc/init.d/rc3.d/S20gpm start
startproc: execve (/usr/sbin/gpm) [ /usr/sbin/gpm -t imps2
-m /dev/mouse
], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console
vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48
SHLVL=2
COLUMNS=128 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/
TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/gpm ]
done
'/etc/init.d/rc3.d/S20gpm start' exits with status 0
/etc/init.d/rc3.d/S20inetd start
Starting inetdstartproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd
], [
PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=cyberspace CONSOLE=/dev/console
vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48 SHLVL=2 COLUMNS=128
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/inetd ]
done
'/etc/init.d/rc3.d/S20inetd start' exits with status 0
/etc/init.d/rc3.d/S21alsasound start
Starting sound driver: cs4236done
Restoring the previous sound settingdone
'/etc/init.d/rc3.d/S21alsasound start' exits with status
0
/etc/init.d/rc3.d/S21apache start
Starting httpd [ ]startproc: execve (/usr/sbin/httpd) [
/usr/sbin/httpd -f
/etc/httpd/httpd.conf ], [ PWD=/ DBROOT=/dev/null BOOT_FILE=/boot/vmlinuz
HOSTNAME=cyberspace CONSOLE=/dev/console LD_LIBRARY_PATH=:/lib vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=48 ORACLE_HOME=
SHLVL=2
COLUMNS=128 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux
HOME=/
TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/httpd ]
done
'/etc/init.d/rc3.d/S21apache start' exits with status 0
/etc/init.d/rc3.d/S21personal-firewall.final start
Starting personal-firewall (final) [not active]unused
'/etc/init.d/rc3.d/S21personal-firewall.final start' exits
with status 6
Master Resource Control: runlevel 3 has been reached
Skipped services in runlevel 3: personal-firewall.initial personal-firewall.final
killproc: kill(116,3)
|
|
